Surfboard Epoxy, Greenroom Epoxy, Resin Research Epoxy Systems

 WE DO NOT SHIP TO UNCONFIRMED ADDRESS!!

surfboard supplies 

Home

Back Packs

Bike racks

Board bags

Body Board Gear

Body Boards

Board Kits

Car Racks

Clothing

Contact Us

Deck Pads

Ding Repair Kits

DVD'S & Videos

Ear Plugs

EPS Blanks

Gift Certificates

Glasses/Goggles

Glassing Kits

Gliders
(auto emblems)

Hats

Long Board Accessories

Nose Guards

Rash Guards

Sale Page

Skateboards

Skateboard Accessories

Skim boards

Skim board Accessories

Stickers

Soft Surfboards

Sunscreen

Surfboards

Surfboard Boxes

Surfboard Fins

Surfboard Leashes

Surf Lessons

Surfboard Repair & Glassing

Surf Books/Maps

Surfing Signs

Tool Kits

Travel Gear

Wall Racks

Wetsuits

Wetsuit Repair

    Call For help

858.361.4957

Phone Orders only at this time.
 Call
858-361-4957
Learn why at paypalsucks.com

Resin Laminating and or sanding

This is the standard polyester surfboard resin used throughout the industry. Sylmar 249A Laminating resin is used for applying the cloth to surfboards. This resin dries tacky and therefore is not sandable it is made to apply more resin to it. To make it sandable, Sanding resin needs to be applied. Catalyst sold separately. Choose lam or sanding in the drop down box.
1 QT.
$17.50
1 Gal.
$43.50

Surfboard EPOXY Ultra Clear with UV Absorber

Pic coming soon
A-Chem. Epoxy with Optical enhancer the epoxy you've been looking for. This state of the art Epoxy Laminates and sands like a dream used throughout the industry Sanding coat similar to Polyester resin. Boards come out very white and stay white longer. Benefits; its extremely easy to use, it dries harder than Polyester, it can be used on Polyurethane blanks or EPS blanks, and is odorless. You must mix at a 2 to 1 (epoxy to hardener) ratio, also mix thoroughly.

This Is the best Surfboard Epoxy on the market. Sands and laminates like a dream.

A flow agent/ surfacing agent/ wetting agent unique to the epoxy industry.  Itís primary function is as a surfacing/sanding agent which gives excellent flow characteristics by reducing surface tension. The same forces that act as a surfacing agent also seal the surface raising barcol hardness. This improves the sanding characteristics of the composites allowing for finer finishing, something epoxy fabricators have always struggled with. Additive X has also found use as a wetting agent/viscosity reducer in fabric intensive hand lay up. Unlike other wetting and surfacing agents Additive X also enhances bond between epoxy coats by eliminating blush chemically. Blush in epoxy coatings is the primary reason for recoating difficulties in the past and required physical removal (usually sanding) before recoating could be attempted. Additive X eliminates this step.

$15.00 per pint.

 

1 1/2 Gal.(1gal.epoxy 1/2gal hardener). 2 board Kit
 $105.00

 

3 Gal. (2gal.epoxy 1gal. hardener). 4 board kit 
$210.00

EPS Paste 

Seal your shaped EPS blank before laminating for  lighter and whiter finished boards. When used with Rev-Chem. epoxy you cant find a whiter board. Goes  on with a squeegee dries in about 10 minutes. After it dries sand lightly no more holes a soled white board. Now begin laminating. 
1 Qt.  
$15.00
1/2 Gal.
$22.00
1 Gal. 
$39.99

BFG Aerialite 4oz. Fiber Glass E-Cloth

Used primarily for shortboards and high performance longboards or for patches under 6 oz. cloth. This E-Cloth is very easy to work with and absorb minimal amounts of resin because of it's tight weave resulting in light weight  surfboards.
27" wide sold by the yard.
$3.50 per yard

BFG Aerialite 4oz.by the Roll

Used primarily for shortboards and high performance longboards. This E-Cloth is very easy to work with and absorb minimal amounts of resin because of it's tight weave resulting in light weight  surfboards. Buy a roll and save$$$!
Roll of 4oz. 27" wide x 125 yd ($2.90 per yd.)
$362.50

BFG Aerialite 6oz. Fiber Glass E-Cloth

The traditional cloth used on most Guns, Big guy boards and longboards.The 6oz E-Cloth has a larger weave and will absorb more resin than 4oz cloth resulting in a heavier and stronger finished surfboard.
30" wide sold by the yard.
$4.35 per yard

BFG Aerialite 6oz.Fiber Glass E-Cloth (roll)

The traditional cloth used on most Guns, Big guy boards and longboards. The 6oz E-Cloth has a larger weave and will absorb more resin than 4oz cloth resulting in a heavier and stronger finished surfboard.Buy it by the roll and save
Roll of 6oz. 30" wide x 125 yd ($3.35 per yd.)
$418.75

 

Surfboard Paint

Pic coming soon
This is the top-quality water-based paint used throughout the industry.  Apply it directly to the shaped blank!  Airbrush or hand brush your favorite design and the color of your choice. Tape it off or go free hand.Use it right out of the bottle or mix them for  custom colors. See colors above Choose your color from the drop down box.
32 oz.
1 Gal.
 
 

Under Construction. Please check back....

 

858-361-4957

La Jolla Surf Shop

info@lajollasurfshop.com

All Returns are subject to a 15% restocking fee customer pays return shipping.